In this episode of DIY Guitar Making, I am making a bridge for my new parlor guitars using Wenge. I talk about why I chose Wenge for this guitar and I demonstrate my process for carving the various bevels and…
Eric Schaefer Guitars
Harmony through Superior Craftsmanship
Category: All
DIY GUITAR MAKING
Category: All
Prepping the Fretboard for Fretting | Guitar #86
In this episode of DIY Guitar Making, I am applying Tru oil to my Wenge fretboard and preparing the fret slots by filing a slight bevel in to each slot. All episodes available at diyguitarmaking.com Register for an 9 day Hands-On…
Fretboard Levelling on Guitar #86 and Tru Oil Finishing on Guitar #106
In this episode of DIY Guitar Making, I am working on both my Wenge Parlor guitar and the Nicaraguan Rosewood Orchestra Model that I have in the finishing room. The Parlor needs the fretboard levelled and radiused and the OM…
Q&A | General or Variable Thicknessed Soundboards?
In this episode of DIY Guitar Making, I am answering YOUR Lutherie related questions! 🔴 All episodes available at diyguitarmaking.com 🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/ 🔴 Check out the online course…
Q&A | Are Routers the Most Dangerous Tool in The Shop?
In this episode of DIY Guitar Making, I am answering Your lutherie related questions! All episodes available at diyguitarmaking.com Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/ Check out the online course “Building an OM Acoustic”: https://www.ericschaeferguitars.com/course/building-an-om-acoustic/ See…
Masterclass | Fretting Hammer Technique | Guitar #106
In this episode of DIY Guitar Making, we are diving deep on methods and technique for hammering frets on an attached neck and fretboard. 🔴 All episodes available at diyguitarmaking.com 🔴 Register for an 9 day Hands-On Guitar Building Workshop…
Guitar #106 | Cutting Binding Channels | Day 13
In this episode of DIY Guitar Making, we are working on Guitar #106 and we are talking binding channels! I demonstrate some techniques for setting up your binding tower jig and honing in on the perfect channel size. 🔴 All…
Guitar #106 | Neck Carving | Day 11 and 12
In this episode of DIY Guitar Making, I am carving and shaping the neckshaft, the headstock and the heel. Also, I install the knife threaded inserts for the bolt on mortise and tenon joint. 🔴 All episodes available at diyguitarmaking.com…
Q&A | What is Falcate Bracing?
In this episode of DIY Guitar Making, I answer YOUR questions! 🔴 All episodes available at diyguitarmaking.com 🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/ 🔴 Check out the online course “Building an OM…
Guitar #106 | Day 10 | Shaping the Headstock, Drilling Tuner Holes, Shaping the Heel
In this episode of DIY Guitar Making, I talk about the advantages of using The Robosander over a standard flush trim router bit in routing the headstock shape. I also drill the tuner holes and discuss the procedure of laying…
Want to really learn more? Take a class with Eric Schaefer and build your own guitar in 8 days
Or Join The Online Guitar Building School
Or Join The Online Guitar Building School
