If you are used to seeing lutherie videos here, then this will be something new for you. I will still be making the videos but now I will also be posting podcast episodes as well! Episode ONE! Dun, dun dun…I…
Eric Schaefer Guitars
Harmony through Superior Craftsmanship
Category: Guitar Making
Installing Carbon Fiber Rods in the Neck of Guitar #56
In this episode of DIY Guitar Making, I install 2 carbon fiber rods on both sides of the truss rod. This gives lateral support to the neck and reinforces it against twisting. I show how I rout out the slots…
Inside Look – Ron and Lamar on the last day of their 8 Day Guitar Building Workshop
Students Ron and Lamar ream their bridge pins to fit, slot the nut and give their guitars a final setup, before stringing them up and playing them for the first time!
Installing a Wolf-against-the-Moon Headstock Inlay
I have a prefabricated wolf inlay from DePaule Supply and, in this episode of DIY Guitar Making, I’m going to drill and install this inlay for a student in an upcoming 8 day Guitar Building Workshop. Enjoy! Starbond Cyanoacrylate Glue…
Installing Binding with Side Purfling on Guitar #56
In this episode of DIY Guitar Making, I’ve attached a thin maple strip to the edge of my ebony binding strips and now I’m cutting the binding channels, and addressing the miters between the florentine cutaway tip and the end…
Attaching Side Purfling to Binding Strips for Guitar #56
In this episode of DIY Guitar Making, I show how I use specialty joining boards to glue purfling strips to the edge of binding strips in order to create side purfling.
Prepping a Ziricote Fretboard for Guitar #56
In this episode of DIY Guitar Making, I resaw, dimension and slot a fretboard out of a waste piece of Ziricote for Guitar #56
Making a Rosette for Ramon’s Classical Guitar
In this episode of DIY Guitar Making, Ramon visits the shop to work on a cool radial rosette design with black limba, burl, and fiber strips. We’re using the Radial Rosette Maker Jig available here: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/
Milling and Slotting a Zebrawood Fretboard for Guitar #57
In this episode of DIY Guitar Making: I’m using Zebrawood for the fingerboard on Guitar #57. I dimension out a rough fretboard blank, cut the fret slots and shape the board.
Binding Guitar #57 with Flamed Maple
In this episode of DIY Guitar Making, I install wood bindings on a florentine cutaway guitar.
Want to really learn more? Take a class with Eric Schaefer and build your own guitar in 8 days
Or Join The Online Guitar Building School
Or Join The Online Guitar Building School
