In this episode of DIY Guitar Making, I discuss how to mark out and cut the notches for the brace ends into the rimset using a set of Dremel tools. Then we talk about installing labels on the back and…
In this episode of DIY Guitar Making, I discuss the backplate and my process for tapering the brace ends and for installing caps over the lap joints. I also talk about side braces and about kerfing installation and radiusing of…
In this episode of DIY Guitar Making, I talk generally about the process of carving and voicing the top braces and how beginners should approach the process, among other tips and tricks presented as I go over what was done…
In this episode of DIY Guitar Making, I discuss the installation of the soundboard braces and give a detailed overview of the various functions of the braces, plates and grafts and how they work together to encourage specific modal movements…
In this episode of DIY Guitar Making, I talk about cutting the 4 lap joints and creating an incredibly tight fit for a lattice and installing it on the back plate. 
All episodes available at diyguitarmaking.com Register for…
In this episode of DIY Guitar Making, I talk about contouring the neck and tailblock and the installation of these critical elements. I also talk about installing the radial rosette that I made for David’s guitar, and lastly I reveal…
In this episode of DIY Guitar Making, I demonstrate my process for bookmatching the backplate, I talk about the role of sapwood in the design, I bend the sides, and I make a radial rosette using the radial rosette maker…
In this episode of DIY Guitar Making, I give you 8 tips to improve your neck fit for an accurate alignment with the bridge location and a more seamless look at the neck to body joint. All episodes available…
In this episode of DIY Guitar Making, I am answering your lutherie questions! � All episodes available at diyguitarmaking.com � Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/ � Check out the online course “Building…
In this 2 part episode of DIY Guitar Making, I demonstrate my process for connecting the various purfling miters along the soundboard, the backplate, the backstripe, the side purfling, and the endwedge. Included are several tips for cutting binding channels,…
Or Join The Online Guitar Building School
Send Voicemail
