In this episode of DIY Guitar Making, we are diving deep on methods and technique for hammering frets on an attached neck and fretboard. 🔴 All episodes available at diyguitarmaking.com 🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://ericschaeferguitars.com/learn-to-build-your-own-guitar/ 🔴 Check out the online course “Building an OM Acoustic”: https://ericschaeferguitars.com/course/building-an-om-acoustic/ […]
Month: June 2023
Guitar #106 | Cutting Binding Channels | Day 13
In this episode of DIY Guitar Making, we are working on Guitar #106 and we are talking binding channels! I demonstrate some techniques for setting up your binding tower jig and honing in on the perfect channel size. 🔴 All episodes available at diyguitarmaking.com 🔴 Register for an 9 day Hands-On Guitar Building Workshop in […]
Guitar #106 | Neck Carving | Day 11 and 12
In this episode of DIY Guitar Making, I am carving and shaping the neckshaft, the headstock and the heel. Also, I install the knife threaded inserts for the bolt on mortise and tenon joint. 🔴 All episodes available at diyguitarmaking.com 🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://ericschaeferguitars.com/learn-to-build-your-own-guitar/ 🔴 […]
Q&A | What is Falcate Bracing?
In this episode of DIY Guitar Making, I answer YOUR questions! 🔴 All episodes available at diyguitarmaking.com 🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://ericschaeferguitars.com/learn-to-build-your-own-guitar/ 🔴 Check out the online course “Building an OM Acoustic”: https://ericschaeferguitars.com/course/building-an-om-acoustic/ 🔴 See Eric’s Available Instruments: https://ericschaeferguitars.com/available-instruments/ 🔴 Check out the Radial Rosette Maker […]
Guitar #106 | Day 10 | Shaping the Headstock, Drilling Tuner Holes, Shaping the Heel
In this episode of DIY Guitar Making, I talk about the advantages of using The Robosander over a standard flush trim router bit in routing the headstock shape. I also drill the tuner holes and discuss the procedure of laying out the neckblank dimensions before shaping the heel. 🔴 All episodes available at diyguitarmaking.com 🔴 […]
Guitar #106 | Day 9 | Abalone Dot Inlays, Installation
In this episode of DIY Guitar Making, I talk about the difference between mother of pearl and abalone. I install the headplate. I drill out the fretboard face dots. I install the abalone side dots, and I cut the backstop for the nut. 🔴 All episodes available at diyguitarmaking.com 🔴 Register for an 9 day […]