DIY Guitar Making Videos

Q&A | Carbon Fiber Neck Reinforcement | Scrapwood | Tru oil | Fretboard Radiusing

In this episode of DIY Guitarmaking, I am answering your questions on carbon fiber rods in guitar necks ,whether to save scrapwood or not to save it!, tru oil finishing, and applying a radius to a fretboard. The mentioned available spots for the Fall Guitar Build Workshops are as follows: September 2 – 10 (1 spot left) September 30 – October 8 (1 spot left) November 11 – 19 (1 spot left)

🔴 All episodes available at diyguitarmaking.com

🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://ericschaeferguitars.com/learn-to-build-your-own-guitar/

🔴 Check out the online course “Building an OM Acoustic”: https://ericschaeferguitars.com/course/building-an-om-acoustic/

🔴 See Eric’s Available Instruments: https://ericschaeferguitars.com/available-instruments/

🔴 Check out the Radial Rosette Maker Jig: https://ericschaeferguitars.com/the-radial-rosette-maker-kit/

Q&A | Do Pickguards Affect Tone? | Ernie Ball Patent | Zero Radius Tops | Bandsaw Blade Tension

In this episode of DIY Guitarmaking, I am answering your questions on plastic pickguards, the Ernie Ball 4 + 2 patent, instruments without a radiused top, and bandsaw blade tensioning and sharpening.

🔴 All episodes available at diyguitarmaking.com

🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://ericschaeferguitars.com/learn-to-build-your-own-guitar/

🔴 Check out the online course “Building an OM Acoustic”: https://ericschaeferguitars.com/course/building-an-om-acoustic/

🔴 See Eric’s Available Instruments: https://ericschaeferguitars.com/available-instruments/

🔴 Check out the Radial Rosette Maker Jig: https://ericschaeferguitars.com/the-radial-rosette-maker-kit/

Broke a Bandsaw Blade! | How to Replace it

In this episode of DIY Guitarmaking, I am replacing my 1/4″ bandsaw blade with a shiny, brand new one because… well, because I screwed up! I show you how to replace the blade and set the tension and tracking. I also show you how I clean the bandsaw wheel tires.

🔴 All episodes available at diyguitarmaking.com

🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://ericschaeferguitars.com/learn-to-build-your-own-guitar/

🔴 Check out the online course “Building an OM Acoustic”: https://ericschaeferguitars.com/course/building-an-om-acoustic/

🔴 See Eric’s Available Instruments: https://ericschaeferguitars.com/available-instruments/

🔴 Check out the Radial Rosette Maker Jig: https://ericschaeferguitars.com/the-radial-rosette-maker-kit/

Q&A and a Soundboard Profiling Demonstration

In this episode of DIY Guitarmaking, I am demonstrating the process of profiling the plates on a bandsaw. I also answer YOUR questions!

🔴 All episodes available at diyguitarmaking.com

🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://ericschaeferguitars.com/learn-to-build-your-own-guitar/

🔴 Check out the online course “Building an OM Acoustic”: https://ericschaeferguitars.com/course/building-an-om-acoustic/

🔴 See Eric’s Available Instruments: https://ericschaeferguitars.com/available-instruments/

🔴 Check out the Radial Rosette Maker Jig: https://ericschaeferguitars.com/the-radial-rosette-maker-kit/

Machine Bending Guitar Sides | Demonstration and Q&A

In this episode of DIY Guitarmaking, I am demonstrating the process of preparing and bending a set of sides using a side bending machine. I also answer YOUR questions!

🔴 All episodes available at diyguitarmaking.com

🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://ericschaeferguitars.com/learn-to-build-your-own-guitar/

🔴 Check out the online course “Building an OM Acoustic”: https://ericschaeferguitars.com/course/building-an-om-acoustic/

🔴 See Eric’s Available Instruments: https://ericschaeferguitars.com/available-instruments/

🔴 Check out the Radial Rosette Maker Jig: https://ericschaeferguitars.com/the-radial-rosette-maker-kit/

Fret Slotting Demonstration and Q&A

In this episode of DIY Guitarmaking, I am demonstrating fret slotting. This is the powered method on the table saw. I also answer YOUR questions!

🔴 All episodes available at diyguitarmaking.com

🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://ericschaeferguitars.com/learn-to-build-your-own-guitar/

🔴 Check out the online course “Building an OM Acoustic”: https://ericschaeferguitars.com/course/building-an-om-acoustic/

🔴 See Eric’s Available Instruments: https://ericschaeferguitars.com/available-instruments/

🔴 Check out the Radial Rosette Maker Jig: https://ericschaeferguitars.com/the-radial-rosette-maker-kit/

Torrefied Spruce | What is Torrefaction | BONUS Bookmatching Demonstration

In this episode of DIY Guitarmaking, I am taking a look at a set of torrefied spruce that I just recieved. I explain what torrefaction is, and as a bonus, I demonstrate jointing and joining techniques for bookmatched pairs.

🔴 All episodes available at diyguitarmaking.com

🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://ericschaeferguitars.com/learn-to-build-your-own-guitar/

🔴 Check out the online course “Building an OM Acoustic”: https://ericschaeferguitars.com/course/building-an-om-acoustic/

🔴 See Eric’s Available Instruments: https://ericschaeferguitars.com/available-instruments/

🔴 Check out the Radial Rosette Maker Jig: https://ericschaeferguitars.com/the-radial-rosette-maker-kit/

Side Thicknessing Demonstration and Q&A

In this episode of DIY Guitarmaking, I am running a set of side slats through the planer and the drum sander to bring it down to an appropriate thickness for bending. Also, I answer YOUR questions!

🔴 All episodes available at www.diyguitarmaking.com

🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://ericschaeferguitars.com/learn-to-build-your-own-guitar/

🔴 Check out the online course “Building an OM Acoustic”: https://ericschaeferguitars.com/course/building-an-om-acoustic/

🔴 See Eric’s Available Instruments: https://ericschaeferguitars.com/available-instruments/

🔴 Check out the Radial Rosette Maker Jig: https://ericschaeferguitars.com/the-radial-rosette-maker-kit/

Shop Rounds | Prepping Parts, Shop Remodeling

In this episode of DIY Guitarmaking, we are doing shop rounds and I’m giving a tour of the shop as it is partway through it’s remodel.

🔴 All episodes available at diyguitarmaking.com

🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://ericschaeferguitars.com/learn-to-build-your-own-guitar/

🔴 Check out the online course “Building an OM Acoustic”: https://ericschaeferguitars.com/course/building-an-om-acoustic/

🔴 See Eric’s Available Instruments: https://ericschaeferguitars.com/available-instruments/

🔴 Check out the Radial Rosette Maker Jig: https://ericschaeferguitars.com/the-radial-rosette-maker-kit/

LIVE(ish) in the Shop | Q&A and a Table Saw Basics Demonstration

In this episode of DIY Guitarmaking, I’m answering your lutherie questions, preparing my sides for thicknessing and demonstrating basic ripping on the table saw.

🔴 All episodes available at diyguitarmaking.com

🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://ericschaeferguitars.com/learn-to-build-your-own-guitar/

🔴 Check out the online course “Building an OM Acoustic”: https://ericschaeferguitars.com/course/building-an-om-acoustic/

🔴 See Eric’s Available Instruments: https://ericschaeferguitars.com/available-instruments/

🔴 Check out the Radial Rosette Maker Jig: https://ericschaeferguitars.com/the-radial-rosette-maker-kit/